High speed series angular contact bearing, High speed series angular contact bearings, Manufacturer, Supplier-NINGBO CIE INDUSTRY AND TRADE CO.,LTD

/ We will do attentively..

Collection / Supposes / E-mail / Site map

Warm congratulation NINGBO CIE INDUSTRY AND TRADE CO.,LTD website clear~

Product List

Auto Bearings

		Front Wheel Hub Bearings
		Rear Wheel Hub Bearings
		Tensioner&Idler Bearings
		Clutch Release Bearings
		Wheel Hub Bearing(One Generation)
		Wheel Hub Bearing( second generation)
		Wheel Hub Bearing ABS System
		Water Pump Bearing
		Automotive Tapered Roller Bearings
		Steering Wheel Bearings
		Universal Joint Kits
		Automobile Center Support Bearing
		Steering Gear Box Bearings
		Special Non Standard Auto Bearing
		Automobile Alternator Bearing
		Automotive Air Condition Bearings

Industry Bearing

		Deep Groove Ball Bearings
		Angular Contact Ball Bearing
		Cylindrical Roller Bearings
		Self-Aligning Ball Bearing
		Spherical Roller Bearings
		Tapered Roller Bearings
		Bearing Units
		Thrust Bearings
		Needle Roller Bearings
		Linear Bearings
		Special Non Standard bearings

Power Transmission Parts

		Ball leading Screw
		Linear Motion Shaft
		Linear Guide Rail and Block Assemblies
		Precise Crossing Guide Rail

Auto Steering Gears

		Worm and level Steering Gears
		Rack and Pinion Type Steering Gears
		Recirculating Ball Type Steering Gears

Industry News

Ballscrew takes to the sky

Federal-mogul blacksburg layoffs continue...MORE

Current Location: Home >> Products >> Industry Bearing >> Angular Contact Ball Bearing >> High speed series angular contact bearings

Products

High speed series angular contact bearings

Physical Characteristics:

Angular contact ball bearings are non-separable type bearings and typically used for carrying combined (axial and radial) loads. They can carry pure axial load and operate in higher speed. That's why many people refer to them incorrectly as thrust bearings.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. Following table describes the characteristics of three types of angular contact ball bearings:

High Speed Use

Available in bearing series 78C, 79C, 70C, 72C, and 73C.
Contact angles: 15°
All bearing accuracies JIS Class 5 or higher.
Standard bearing cage type differs depending on bearing no.

C means the conatacted angleis 15°
AC means the conatacted angleis 30°
Bearing no.	d	D	B	rsmin	r1smin	Bearing no.	d	D	B	rsmin	r2smin
708C	8	22	7	0.30	0.15	7016C	80	125	22	1.10	0.60
708AC	8	22	7	0.30	0.15	7016AC	80	125	22	1.10	0.60
7000C	10	26	8	0.30	0.15	7017C	85	130	22	1.10	0.60
7000AC	10	26	8	0.30	0.15	7017AC	85	130	22	1.10	0.60
7001C	12	28	8	0.30	0.15	7018C	90	140	24	1.50	0.60
7001AC	12	28	8	0.30	0.15	7018AC	90	140	24	1.50	0.60
7002C	15	32	9	0.30	0.15	7019C	95	145	24	1.50	0.60
7002AC	15	32	9	0.30	0.15	7019AC	95	145	24	1.50	0.60
7003C	17	35	10	0.30	0.15	7020C	100	150	24	1.50	0.60
7003AC	17	35	10	0.30	0.15	7020AC	100	150	24	1.50	0.60
7004C	20	42	12	0.60	0.15	7021C	10	30	9	0.60	0.15
7004AC	20	42	12	0.60	0.15	7021AC	10	30	9	0.60	0.15
7005C	25	47	12	0.60	0.15	7022C	110	170	28	2.00	1.00
7005AC	25	47	12	0.60	0.15	7022AC	110	170	28	2.00	1.00
7006C	30	55	13	1.00	0.30	7024C	120	180	28	2.00	1.00
7006AC	30	55	13	1.00	0.30	7024AC	120	180	28	2.00	1.00
7007C	35	62	14	1.00	0.30	7026C	130	200	33	2.00	1.00
7007AC	35	62	14	1.00	0.30	7026AC	130	200	33	2.00	1.00
7008C	40	68	15	1.00	0.30	7028C	140	210	33	2.00	1.00
7008AC	40	68	15	1.00	0.30	7028AC	140	210	33	2.00	1.00
7009C	45	75	16	1.00	0.30	7030C	150	225	35	2.10	1.10
7009AC	45	75	16	1.00	0.30	7030AC	150	225	35	2.10	1.10
7010C	50	80	16	1.00	0.30	7032C	160	240	38	2.10	1.10
7010AC	50	80	16	1.00	0.30	7032AC	160	240	38	2.10	1.10
7011C	55	90	18	1.10	0.60	7034C	170	260	42	2.10	1.10
7011AC	55	90	18	1.10	0.60	7034AC	170	260	42	2.10	1.10
7012C	60	95	18	1.10	0.60	7036C	180	280	46	2.10	1.10
7012AC	60	95	18	1.10	0.60	7036AC	180	280	46	2.10	1.10
7013C	65	100	18	1.10	0.60	7038C	190	290	46	2.10	1.10
7013AC	65	100	18	1.10	0.60	7038AC	190	290	46	2.10	1.10
7014C	70	110	20	1.10	0.60	7040C	200	310	51	2.10	1.10
7014AC	70	110	20	1.10	0.60	7040AC	200	310	51	2.10	1.10
7015C	75	115	20	1.10	0.60	7044C	220	340	56	3.00	1.10
7015AC	75	115	20	1.10	0.60	7044AC	220	340	56	3.00	1.10

Angular contact ball bearings are ideally suited to applications such as compressors, pumps, fans, windmills, gearboxes and turbines. Any question. Please keep in contact us in details.

Angular Contact Ball Bearing

Angular contact bearing with separable outer rings

High speed series angular contact bearings

Angular contact bearing with counter bore on inner rings

Single row angular contact bearing without cages

Angular contact bearing with separable inner rings

Four point contact angular contact bearing

Double row angular contact bearing

Double row angular contact ball bearing with two-piece inner ring

Matched pair angular contact ball bearings with spherical housing washer

Other related category:	Auto Bearings, Power Transmission Parts, Auto Steering Gears
Relative Product :	Deep Groove Ball Bearings , Angular Contact Ball Bearing , Cylindrical Roller Bearings , Self-Aligning Ball Bearing , Spherical Roller Bearings , Tapered Roller Bearings , Bearing Units , Thrust Bearings , Needle Roller Bearings , Linear Bearings , Special Non Standard Bearings

Workshop | Products | Contact