Tapered roller bearing with large contact angle, Tapered roller bearings with large contact angle, Manufacturer, Supplier-NINGBO CIE INDUSTRY AND TRADE CO.,LTD

/ We will do attentively..

Collection / Supposes / E-mail / Site map

Warm congratulation NINGBO CIE INDUSTRY AND TRADE CO.,LTD website clear~

Product List

Auto Bearings

		Front Wheel Hub Bearings
		Rear Wheel Hub Bearings
		Tensioner&Idler Bearings
		Clutch Release Bearings
		Wheel Hub Bearing(One Generation)
		Wheel Hub Bearing( second generation)
		Wheel Hub Bearing ABS System
		Water Pump Bearing
		Automotive Tapered Roller Bearings
		Steering Wheel Bearings
		Universal Joint Kits
		Automobile Center Support Bearing
		Steering Gear Box Bearings
		Special Non Standard Auto Bearing
		Automobile Alternator Bearing
		Automotive Air Condition Bearings

Industry Bearing

		Deep Groove Ball Bearings
		Angular Contact Ball Bearing
		Cylindrical Roller Bearings
		Self-Aligning Ball Bearing
		Spherical Roller Bearings
		Tapered Roller Bearings
		Bearing Units
		Thrust Bearings
		Needle Roller Bearings
		Linear Bearings
		Special Non Standard bearings

Power Transmission Parts

		Ball leading Screw
		Linear Motion Shaft
		Linear Guide Rail and Block Assemblies
		Precise Crossing Guide Rail

Auto Steering Gears

		Worm and level Steering Gears
		Rack and Pinion Type Steering Gears
		Recirculating Ball Type Steering Gears

Industry News

Ballscrew takes to the sky

Federal-mogul blacksburg layoffs continue...MORE

Current Location: Home >> Products >> Industry Bearing >> Tapered Roller Bearings >> Tapered roller bearings with large contact angle

Products

Tapered roller bearings with large contact angle

Tapered Roller Bearing apply to the main radial load to bear the main radial and axial load combined, and the large cone angle tapered roller bearings can be used to bear the axial load-based track, combined axial loading. Bearing such as the separation-bearing, the inner ring (including the tapered roller and cage) and the outer ring can be installed in the installation and use of the process of adjustment may be bearing the axial and radial clearance clearance, can also advance Tight installation.

The main structure
DF single row tapered roller bearings-30000
Bearing this case to limit the shaft in one direction or the axial displacement, under the direction of an axial load. In the radial load will have additional axial force, in general support of the two-axis, the bearing inner and outer ring of the end of the same name relative to install, such as the use of a separate, and its axial force applied must be greater than the additional Axial force. 313 series of tapered roller bearings with large contact angle (27 ° -30 °), can bear a greater axial loading. Other series bearings in the contact angle between 10 ° -18 °.
Single row tapered roller bearings size table gives the ISO355-size tapered roller bearings, code-named series, bearing only the exchange of reference.

Tapered Roller Bearing Axial Clearance of the size of the bearing on the ability to affect a lot of good work. When the axial clearance over an hour, the temperature rise; axial clearance is too large, easily damaged bearings. Therefore, in the installation and operation should pay special attention to the adjustment of the bearing axial clearance.

BEARING NO	OLD	NSK	NTN	FAG	SKF	SIZE(dxDxT)	WEIGHT(kg)
31303	27303E					17×47×15.25	0.132
31304	27304E						-
31305	27305E	31305D	ET-31305D	31305A	31305	25×62×18.25	0.26
31306	27306E	31306D	ET-31306D	31306A	31306	30×72×20.75	-
31306WB1						30×72×20.75	0.398
31307	27307E	HR31307DJ	4T-31307D	31307A	31307	35×80×22.75	0.523
31308	27308					40×90×25.25	0.66
31308	27308E	HR31308DJ	4T-31308D	31308A	31308	40×90×25.25	0.731
31309	27309					45×100×29.25	0.974
31309	27309E	HR31309DJ	4T-31309D	31309A	31309	45×100×29.25	0.977
31310	27310					50×110×29.25	1.223
31310	27310E	HR31310DJ	4T-31310D	31310A	31310	50×110×29.25	1.25
31310	27310EK					50×110×29.25	1.2
31311	27311					55×120×31.5	1.554
31311	27311E	HR31311DJ	4T-31311D	31311A	31311	55×120×31.5	1.78
31311	27311EK					55×120×32	1.54
31311/YA	27311EK					55×120×31.5	-
31311/YB2	27311EK					55×120×31.5	1.55
31312	27312E	HR31312DJ	4T-31312D	31312A	31312	60×130×33.5	1.92
31312	27312EK					60×130×33.5	-
31313	27313E	HR31313DJ	4T-31313D	31313A	31313	65×140×36	2.46
31313/YB2	27313EK					65×140×36	2.39
31313	27313EK					65×140×36	-
31313/S0	27313ET					65×140×36	2.46
31314	27314E	HR31314DJ	4T-31314D	31314A	31314	70×150×38	2.87
31314/YA	27314EK					70×150×38	-
31315	27315E	HR31315DJ	31315DU	31315	31315	75×160×40	3.4
31315/S0	27315ET					75×160×40	3.54
31316	27316E	HR31316DJ	31316DU	31316	31316	80×170×42.5	3.65
31317	27317E	HR31317DJ	31317DU	31317	31317	85×180×44.5	4.92
31318	27318E	HR31318DJ	31318DU	31318	31318	90×190×46.5	5.53
31319	27319E	HR31319DJ	31319DU	31319A	31319	95×200×49.5	6.84
31320	27320E		31320XU	31320X	31320X	100×215×56.5	-
31321	27321E		31321XU		31321X	105×225×58	-
31322	27322E		31322XU	31322X	31322X	110×240×63	12.5
31324	27324E		31324XU	31324X	31324X	120×260×68	15.6
31326	27326E		31326XU	31326X	31326X	130×280×72	18.9
31326/DF						130×280×144	40.8
31328	27328					140×300×77	22.7
31328	27328E		31328XU	31328X	31328X	140×300×77	23.4

BEARING NO	OLD	NSK	NTN	FAG	SKF	SIZE(dxDxT)	WEIGHT(kg)
31330	27330E		31330XU	31330X	31330X	150×320×82	-
31332	27332E					160×340×88	29.9
32205B	27505E					25×52×19.25	0.186
32205B	7505EK					25×52×19.25	0.187
30306B/HC3YB2						30×72×20.75	0.379
30307B						35×80×22.75	0.425
32312B	7612K					60×130×48.5	2.99
33114X2B	27714E					70×120×45	1.89
33116X2B	27716E					80×130×32	-
32209X2B	27509E					45×85×25	0.584
30305X2B	27705E					25×62×18.25	0.268
30306X2B	27706					30×72×24.5	0.472
30306X2B	27706E					30×72×24.5	0.477
30309X2B	27709					45×100×31.8	1.054
30309X2B	27709E					45×100×31.8	-
30309X2B	27709					45×100×32	1.04
30309X2B	27709K					45×100×32	1.067
30309X2B	JT27709					45×100×32	1.04
30309X2B	27709E					45×100×32	1.067
	JT09/27709					45×100×32	1.04
	JT10/27709					45×100×32	1.04
	JT27709					45×100×32	1.04
30311X3B	27711E					55×125×37	2.102
30311X3B	27711E					55×125×37	-
30312X1B	27712					60×135×33.45	2.07

To select the right roller bearing, one must determine the desired bearing life and a sufficient basic dynamic load rating to meet that life requirement. Roller bearings are used in power generation, wind turbines, gear drives, rolling mills. Single-row tapered roller bearings are used in machine tool spindles, gear reduction units etc.. any question of tapered roller bearings’s working condition,Welcome to contact us in details.

Tapered Roller Bearings

Single row tapered roller bearings

Tapered roller bearings with large contact angle

Tapered roller bearing with flanged outer rings

Double tapered roller bearings

Inch series single row tapered roller bearings

Four row tapered roller bearings (380000 type)

Other related category:	Auto Bearings, Power Transmission Parts, Auto Steering Gears
Relative Product :	Deep Groove Ball Bearings , Angular Contact Ball Bearing , Cylindrical Roller Bearings , Self-Aligning Ball Bearing , Spherical Roller Bearings , Tapered Roller Bearings , Bearing Units , Thrust Bearings , Needle Roller Bearings , Linear Bearings , Special Non Standard Bearings

Workshop | Products | Contact